制作openstack离线 yum 源
创始人
2024-02-10 17:27:47
0次
启动克隆好的虚拟机，改 hostname 、 ip
# hostnamectl set-hostname yum01
# sed -i 's/59.251/59.250/g' /etc/sysconfig/network-scripts/ifcfg-ens33
# systemctl restart network
# ping www.baidu.com
再次检查一下 selinux 和防火墙状态，确保在系统初始化设置时就已经关闭。
2 、从阿里云下载 yum 配置文件
# cd /etc/yum.repos.d && mkdir backup && mv *.repo backup/
# curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
# sed -i -e '/mirrors.cloud.aliyuncs.com/d' -e '/mirrors.aliyuncs.com/d' /etc/yum.repos.d/CentOS-Base.repo
# yum -y install centos-release-openstack-train
添加 ceph-nautilus 源
vim /etc/yum.repos.d/ceph.repo
[ceph]
name=Ceph packages for $basearch
baseurl=http://mirrors.aliyun.com/ceph/rpm-nautilus/el7/x86_64
enabled=1
gpgcheck=0
[ceph-noarch]
name=Ceph noarch packages
baseurl=http://mirrors.aliyun.com/ceph/rpm-nautilus/el7/noarch
enabled=1
gpgcheck=0
[ceph-source]
name=Ceph source packages
baseurl=http://mirrors.aliyun.com/ceph/rpm-nautilus/el7/SRPMS
enabled=1
gpgcheck=0
3 、安装相关软件包
# yum -y install createrepo yum-utils httpd reposync
# systemctl enable httpd && systemctl start httpd
4 、创建仓库目录
# mkdir -p /var/www/html/yumrepos
4 、根据 CentOS-Base.repo 同步阿里云软件包到本地
# reposync -p /var/www/html/yumrepos/
如果只想同步 CentOS-Base.repo 中指定块 [section] 中的 rpm 包，可以指定名称同步
# reposync -n --repoid=base --repoid=updates -p /var/www/html/yumrepos/
# reposync -n --repoid=ceph --repoid=ceph-noarch -p /var/www/html/yumrepos/
# reposync -n --repoid=centos-openstack-train -p /var/www/html/yumrepos/
# reposync -n --repoid=centos-qemu-ev -p /var/www/html/yum
说明：以上仓库必须同步到本地
此处再以 zabbix 离线源为例
安装 zabbix-4.0 的 yum 源配置文件
# rpm -Uvh https://repo.zabbix.com/zabbix/4.0/rhel/7/x86_64/zabbix-release-4.0-2.el7.noarch.rpm
安装好 zabbix-release-4.0-2.el7.noarch.rpm 会在/etc/yum.repos.d/ 下生成 zabbix.repo 文件
# cat /etc/yum.repos.d/zabbix.repo
[zabbix]
name=Zabbix Official Repository - $basearch
baseurl=http://repo.zabbix.com/zabbix/4.0/rhel/7/$basearch/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
[zabbix-debuginfo]
name=Zabbix Official Repository debuginfo - $basearch
baseurl=http://repo.zabbix.com/zabbix/4.0/rhel/7/$basearch/debuginfo/
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX-A14FE591
gpgcheck=1
[zabbix-non-supported]
name=Zabbix Official Repository non-supported - $basearch
baseurl=http://repo.zabbix.com/non-supported/rhel/7/$basearch/
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-ZABBIX
gpgcheck=1
只同步[zabbix]块中的 rpm 包到本地
# reposync -n --repoid=zabbix -p /var/www/html/yumrepos/
OpenResty的安装：在线YUM安装
yum install yum-utils
#yum-config-manager --add-repo https://openresty.org/package/centos/openresty.repo
[root@yum01 yum.repos.d]# ls
backup ceph.repo
CentOS-Base.repo docker-ce.repo
CentOS-Ceph-Nautilus.repo epel.repo
CentOS-NFS-Ganesha-28.repo epel-testing.repo
CentOS-OpenStack-train.repo openresty.repo
CentOS-QEMU-EV.repo zabbix.repo
CentOS-Storage-common.repo
[root@yum01 yum.repos.d]# reposync -n --repoid=openresty -p /var/www/html/yumrepos/
openresty | 2.9 kB 00:00
openresty/7/x86_64/primary_db | 56 kB 00:00
warning: /var/www/html/yumrepos/openresty/openresty-1.21.4.1-1.el7.x86_64.rpm: Header V4 RSA/SHA1 Signature, key ID d5edeb74: NOKEY
Public key for openresty-1.21.4.1-1.el7.x86_64.rpm is not installed
(1/46): openresty-1.21.4.1-1.el7.x86_64.rpm | 1.1 MB 00:00
(2/46): openresty-asan-debuginfo-1.21.4.1-1.el7. | 4.9 MB 00:00
(3/46): openresty-debug-1.21.4.1-1.el7.x86_64.rp | 1.2 MB 00:00
(4/46): openresty-debug-debuginfo-1.21.4.1-1.el7 | 1.6 MB 00:00
(5/46): openresty-debuginfo-1.21.4.1-1.el7.x86_6 | 3.4 MB 00:00
(6/46): openresty-doc-1.21.4.1-1.el7.noarch.rpm | 609 kB 00:00
(7/46): openresty-openssl-1.1.0l-2.el7.x86_64.rp | 1.4 MB 00:00
(8/46): openresty-openssl-asan-1.1.0l-2.el7.x86_ | 1.9 MB 00:00
(9/46): openresty-openssl-asan-debuginfo-1.1.0l- | 1.9 MB 00:00
(10/46): openresty-openssl-asan-devel-1.1.0l-2.e | 1.9 MB 00:00
(11/46): openresty-asan-1.21.4.1-1.el7.x86_64.rp | 2.2 MB 00:03
(12/46): openresty-openssl-debug-1.1.0l-2.el7.x8 | 1.0 MB 00:00
(13/46): openresty-openssl-debug-devel-1.1.0l-2. | 1.1 MB 00:00
(14/46): openresty-openssl-debug-debuginfo-1.1.0 | 1.3 MB 00:00
(15/46): openresty-openssl-debuginfo-1.1.0l-2.el | 2.9 MB 00:00
(16/46): openresty-openssl111-1.1.1s-1.el7.x86_6 | 1.6 MB 00:00
(17/46): openresty-openssl-devel-1.1.0l-2.el7.x8 | 1.5 MB 00:00
(18/46): openresty-openssl111-asan-1.1.1s-1.el7. | 1.8 MB 00:00
(19/46): openresty-openssl111-asan-devel-1.1.1s- | 1.9 MB 00:00
(20/46): openresty-openssl111-debug-1.1.1s-1.el7 | 1.2 MB 00:00
(21/46): openresty-openssl111-asan-debuginfo-1.1 | 4.3 MB 00:01
(22/46): openresty-openssl111-debug-debuginfo-1. | 2.0 MB 00:00
(23/46): openresty-openssl111-debug-devel-1.1.1s | 1.3 MB 00:00
(24/46): openresty-openssl111-devel-1.1.1s-1.el7 | 1.7 MB 00:00
(25/46): openresty-opm-1.21.4.1-1.el7.noarch.rpm | 20 kB 00:00
(26/46): openresty-pcre-8.45-1.el7.x86_64.rpm | 151 kB 00:00
(27/46): openresty-openssl111-debuginfo-1.1.1s-1 | 3.9 MB 00:01
(28/46): openresty-pcre-asan-8.45-1.el7.x86_64.r | 216 kB 00:00
(29/46): openresty-pcre-asan-debuginfo-8.45-1.el | 366 kB 00:00
(30/46): openresty-pcre-asan-devel-8.45-1.el7.x8 | 225 kB 00:00
(31/46): openresty-pcre-debuginfo-8.45-1.el7.x86 | 276 kB 00:00
(32/46): openresty-resty-1.21.4.1-1.el7.noarch.r | 14 kB 00:00
(33/46): openresty-pcre-devel-8.45-1.el7.x86_64. | 166 kB 00:00
(34/46): openresty-valgrind-1.21.4.1-1.el7.x86_6 | 1.2 MB 00:00
(35/46): openresty-zlib-1.2.12-1.el7.x86_64.rpm | 54 kB 00:00
(36/46): openresty-zlib-asan-1.2.12-2.el7.x86_64 | 78 kB 00:00
(37/46): openresty-zlib-asan-debuginfo-1.2.12-2. | 129 kB 00:00
(38/46): openresty-zlib-asan-devel-1.2.12-2.el7. | 108 kB 00:00
(39/46): openresty-zlib-debuginfo-1.2.12-1.el7.x | 107 kB 00:00
(40/46): openresty-zlib-devel-1.2.12-1.el7.x86_6 | 85 kB 00:00
(41/46): openresty-valgrind-debuginfo-1.21.4.1-1 | 1.6 MB 00:00
(42/46): perl-Lemplate-0.15-1.el7.centos.noarch. | 75 kB 00:00
(43/46): perl-Spiffy-0.46-3.el7.centos.noarch.rp | 36 kB 00:00
(44/46): perl-Test-Base-0.88-2.el7.centos.noarch | 47 kB 00:00
(45/46): perl-Test-LongString-0.17-1.el7.centos. | 14 kB 00:00
(46/46): perl-Test-Nginx-0.29-2.el7.noarch.rpm | 111 kB 00:00
[root@yum01 yum.repos.d]# ^C
centos7 离线安装docker-ce
#添加docker repo
# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
[root@yum01 yum.repos.d]# yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
Loaded plugins: fastestmirror, langpacks
adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
[root@yum01 yum.repos.d]# ls
backup CentOS-Storage-common.repo
CentOS-Base.repo ceph.repo
CentOS-Ceph-Nautilus.repo docker-ce.repo
CentOS-NFS-Ganesha-28.repo epel.repo
CentOS-OpenStack-train.repo epel-testing.repo
CentOS-QEMU-EV.repo zabbix.repo
[root@yum01 yum.repos.d]# reposync -n --repoid=doc^Cr-ce -p /var/www/html/yumrepos/
[root@yum01 yum.repos.d]# cat docker-ce.repo
[docker-ce-stable]
name=Docker CE Stable - $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/$basearch/stable
enabled=1
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-stable-debuginfo]
name=Docker CE Stable - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/debug-$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-stable-source]
name=Docker CE Stable - Sources
baseurl=https://download.docker.com/linux/centos/$releasever/source/stable
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-test]
name=Docker CE Test - $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-test-debuginfo]
name=Docker CE Test - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/debug-$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-test-source]
name=Docker CE Test - Sources
baseurl=https://download.docker.com/linux/centos/$releasever/source/test
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-nightly]
name=Docker CE Nightly - $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg[docker-ce-nightly-debuginfo]
name=Docker CE Nightly - Debuginfo $basearch
baseurl=https://download.docker.com/linux/centos/$releasever/debug-$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[docker-ce-nightly-source]
name=Docker CE Nightly - Sources
baseurl=https://download.docker.com/linux/centos/$releasever/source/nightly
enabled=0
gpgcheck=1
gpgkey=https://download.docker.com/linux/centos/gpg
[root@yum01 yum.repos.d]# reposync -n --repoid=docker-ce --repoid=docker-ce-stable -p /var/www/html/yumrepos/
docker-ce-stable | 3.5 kB 00:00
(1/2): docker-ce-stable/7/x86_64/updateinfo | 55 B 00:00
(2/2): docker-ce-stable/7/x86_64/primary_db | 88 kB 00:00
Warning: cannot find repository docker-ce
warning: /var/www/html/yumrepos/docker-ce-stable/Packages/docker-ce-20.10.21-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
Public key for docker-ce-20.10.21-3.el7.x86_64.rpm is not installed
(1/7): docker-ce-20.10.21-3.el7.x86_64.rpm | 22 MB 00:09
(2/7): containerd.io-1.6.10-3.1.el7.x86_64.rpm | 33 MB 00:14
(3/7): docker-ce-rootless-extras-20.10.21-3.el7. | 8.5 MB 00:02
(4/7): docker-ce-cli-20.10.21-3.el7.x86_64.rpm | 30 MB 00:08
(5/7): docker-ce-selinux-17.03.3.ce-1.el7.noarch | 29 kB 00:00
(6/7): docker-scan-plugin-0.21.0-3.el7.x86_64.rp | 3.8 MB 00:01
(7/7): docker-compose-plugin-2.12.2-3.el7.x86_64 | 10 MB 00:03
[root@yum01 yum.repos.d]# ls
backup CentOS-Storage-common.repo
CentOS-Base.repo ceph.repo
CentOS-Ceph-Nautilus.repo docker-ce.repo
CentOS-NFS-Ganesha-28.repo epel.repo
CentOS-OpenStack-train.repo epel-testing.repo
CentOS-QEMU-EV.repo zabbix.repo
[root@yum01 yum.repos.d]#
RHEL / CentOS 配置epel源
#yum install epel-release
#reposync -n --repoid=epel -p /var/www/html/yumrepos/
操作系统版本如果是8以下可以直接wget已配置好的repo文件，根据你目前使用的操作系统配置对应的源就OK
epel (RHEL 7)
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
5、使用 createrepo 命令创建本地 yum 源，即为存放于本地特定位置的众多 rpm 包建立索引，描述各包所需依赖信息，并形成元数据
进到 /var/www/html/yumrepos/ 目录下的每一个目录执行 createrepo . 命令
# cd /var/www/html/yumrepos/base
# createrepo .
6、定期更新
# reposync -n --repoid=base -p /var/www/html/yumrepos/
# cd /var/www/html/yumrepos/base
# createrepo --update . // 或者使用命令 createrepo --update /var/www/html/yumrepos/base
按上述方法，将 openstack 所依赖的 rpm 包全部下载到本地
2 使用离线 yum 源
1、在 template 模板主机上执行
# cd /etc/yum.repos.d/ && mkdir backup && mv *.repo backup/
# wget http://yum01/private.repo -O /etc/yum.repos.d/private.repo
yum 客户端在执行 yum update 时可能会出现如下包冲突情况。
处理方法：根据提示卸载对应包，再执行 update
# yum erase PyQt4-4.10.1-13.el7.x86_64 sip-4.14.6-4.el7.x86_64 -y
# yum update -y/*
更新完成后， 在/etc/yum.repos.d/目录下会重新生成缺省的 repo 文件，需要先移除，才能继续下一步。
*/
安装 OpenStack 客户端
#yum -y install python-openstackclient
完成更新后，重启一下系统，确保没有问题。
关闭 template 虚拟机，基于更新后的 template 虚拟机进行克隆，需克隆 6 台主机，包括 controller、compute01、compute02、ceph01、ceph02、ceph03
在源主机上创建private.repo
/*
Private.repo
[base]
name=CentOS-$releasever - Base
baseurl=http://yum01/yumrepos/base/
gpgcheck=0
enabled=1
[epel]
name=CentOS-$releasever - epel
baseurl=http://yum01/yumrepos/epel/
gpgcheck=0
enabled=1
[docker-ce-stable]
name=CentOS-$releasever - docker-ce-stable
baseurl=http://yum01/yumrepos/docker-ce-stable/
gpgcheck=0
17 来 bilibili 关注：itcooking
enabled=1
[updates]
name=CentOS-$releasever - Updates
baseurl=http://yum01/yumrepos/updates/
gpgcheck=0
enabled=1
[extras]
name=CentOS-$releasever - Extras
baseurl=http://yum01/yumrepos/extras/
gpgcheck=0
enabled=1
[centos-openstack-train]
name=CentOS-7 - OpenStack train
baseurl=http://yum01/yumrepos/centos-openstack-train/
gpgcheck=0
enabled=1
[centos-qemu-ev]
name=CentOS-$releasever - QEMU EV
baseurl=http://yum01/yumrepos/centos-qemu-ev/
gpgcheck=0
enabled=1
[ceph]
name=ceph-Nautilus
baseurl=http://yum01/yumrepos/ceph/
gpgcheck=0
enabled=1
[ceph-noarch]
name=ceph-noarch Nautilus
baseurl=http://yum01/yumrepos/ceph-noarch/
gpgcheck=0
enabled=1
[centos-nfs-ganesha28]
name=CentOS-7 - NFS Ganesha 2.8
baseurl=http://yum01/yumrepos/centos-nfs-ganesha28/
gpgcheck=0
enabled=1
[openresty]
name=Official OpenResty Open Source Repository for CentOS
baseurl=http://yum01/yumrepos/openresty/
skip_if_unavailable=False
gpgcheck=0
repo_gpgcheck=0
gpgkey=file:///etc/yum.repos.d/pubkey.gpg
enabled=1
enabled_metadata=1
*/
安装 OpenStack 客户端
[root@template yum.repos.d]# yum -y install python-openstackclient
Loaded plugins: fastestmirror, langpacks
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Loading mirror speeds from cached hostfile* base: mirrors.ustc.edu.cn* extras: mirrors.cqu.edu.cn* updates: mirrors.ustc.edu.cn
Resolving Dependencies
--> Running transaction check
---> Package python2-openstackclient.noarch 0:4.0.2-1.el7 will be installed
--> Processing Dependency: python-openstackclient-lang = 4.0.2-1.el7 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-oslo-utils >= 3.33.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-oslo-i18n >= 3.15.3 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-osc-lib >= 1.14.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-openstacksdk >= 0.17.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-novaclient >= 1:15.0.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-neutronclient >= 6.7.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-keystoneclient >= 1:3.17.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-keystoneauth1 >= 3.6.2 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-glanceclient >= 1:2.8.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-cinderclient >= 3.3.0 for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-pbr for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-cliff for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Processing Dependency: python2-babel for package: python2-openstackclient-4.0.2-1.el7.noarch
--> Running transaction check
---> Package python-openstackclient-lang.noarch 0:4.0.2-1.el7 will be installed
---> Package python2-babel.noarch 0:2.6.0-4.el7 will be installed
---> Package python2-cinderclient.noarch 0:5.0.2-1.el7 will be installed
--> Processing Dependency: python2-simplejson for package: python2-cinderclient-5.0.2-1.el7.noarch
--> Processing Dependency: python2-prettytable for package: python2-cinderclient-5.0.2-1.el7.noarch
---> Package python2-cliff.noarch 0:2.16.0-2.el7 will be installed
--> Processing Dependency: python2-stevedore >= 1.20.0 for package: python2-cliff-2.16.0-2.el7.noarch
--> Processing Dependency: python2-cmd2 >= 0.6.7 for package: python2-cliff-2.16.0-2.el7.noarch
--> Processing Dependency: python2-unicodecsv for package: python2-cliff-2.16.0-2.el7.noarch
---> Package python2-glanceclient.noarch 1:2.17.1-1.el7 will be installed
--> Processing Dependency: python-wrapt for package: 1:python2-glanceclient-2.17.1-1.el7.noarch
--> Processing Dependency: python-warlock for package: 1:python2-glanceclient-2.17.1-1.el7.noarch
---> Package python2-keystoneauth1.noarch 0:3.17.4-1.el7 will be installed
--> Processing Dependency: python2-os-service-types >= 1.2.0 for package: python2-keystoneauth1-3.17.4-1.el7.noarch
--> Processing Dependency: python2-iso8601 >= 0.1.11 for package: python2-keystoneauth1-3.17.4-1.el7.noarch
---> Package python2-keystoneclient.noarch 1:3.21.0-2.el7 will be installed
--> Processing Dependency: python2-oslo-serialization >= 2.18.0 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
--> Processing Dependency: python2-oslo-config >= 2:5.2.0 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
--> Processing Dependency: python2-debtcollector >= 1.2.0 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
--> Processing Dependency: python-keyring >= 5.5.1 for package: 1:python2-keystoneclient-3.21.0-2.el7.noarch
---> Package python2-neutronclient.noarch 0:6.14.1-1.el7 will be installed
--> Processing Dependency: python2-oslo-log >= 3.36.0 for package: python2-neutronclient-6.14.1-1.el7.noarch
--> Processing Dependency: python2-os-client-config >= 1.28.0 for package: python2-neutronclient-6.14.1-1.el7.noarch
---> Package python2-novaclient.noarch 1:15.1.1-1.el7 will be installed
---> Package python2-openstacksdk.noarch 0:0.36.5-1.el7 will be installed
--> Processing Dependency: python2-requestsexceptions >= 1.2.0 for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-jsonpatch >= 1.16 for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-munch for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-jmespath for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-dogpile-cache for package: python2-openstacksdk-0.36.5-1.el7.noarch
--> Processing Dependency: python2-appdirs for package: python2-openstacksdk-0.36.5-1.el7.noarch
---> Package python2-osc-lib.noarch 0:1.14.1-2.el7 will be installed
---> Package python2-oslo-i18n.noarch 0:3.24.0-2.el7 will be installed
--> Processing Dependency: python-oslo-i18n-lang = 3.24.0-2.el7 for package: python2-oslo-i18n-3.24.0-2.el7.noarch
---> Package python2-oslo-utils.noarch 0:3.41.6-1.el7 will be installed
--> Processing Dependency: python-oslo-utils-lang = 3.41.6-1.el7 for package: python2-oslo-utils-3.41.6-1.el7.noarch
--> Processing Dependency: python2-monotonic for package: python2-oslo-utils-3.41.6-1.el7.noarch
--> Processing Dependency: python2-funcsigs for package: python2-oslo-utils-3.41.6-1.el7.noarch
---> Package python2-pbr.noarch 0:5.1.2-2.el7 will be installed
--> Running transaction check
---> Package python-keyring.noarch 0:5.7.1-1.el7 will be installed
---> Package python-oslo-i18n-lang.noarch 0:3.24.0-2.el7 will be installed
---> Package python-oslo-utils-lang.noarch 0:3.41.6-1.el7 will be installed
---> Package python-prettytable.noarch 0:0.7.2-3.el7 will be installed
---> Package python-unicodecsv.noarch 0:0.14.1-4.el7 will be installed
---> Package python-warlock.noarch 0:1.0.1-1.el7 will be installed
--> Processing Dependency: python-jsonschema for package: python-warlock-1.0.1-1.el7.noarch
---> Package python2-appdirs.noarch 0:1.4.4-1.el7 will be installed
---> Package python2-cmd2.noarch 0:0.8.8-5.el7 will be installed
--> Processing Dependency: python2-wcwidth for package: python2-cmd2-0.8.8-5.el7.noarch
--> Processing Dependency: python2-pyperclip for package: python2-cmd2-0.8.8-5.el7.noarch
--> Processing Dependency: python2-contextlib2 for package: python2-cmd2-0.8.8-5.el7.noarch
---> Package python2-debtcollector.noarch 0:1.22.0-2.el7 will be installed
---> Package python2-dogpile-cache.noarch 0:0.6.8-1.el7 will be installed
---> Package python2-funcsigs.noarch 0:1.0.2-4.el7 will be installed
---> Package python2-iso8601.noarch 0:0.1.11-8.el7 will be installed
---> Package python2-jmespath.noarch 0:0.9.4-2.el7 will be installed
---> Package python2-jsonpatch.noarch 0:1.21-1.el7 will be installed
--> Processing Dependency: python2-jsonpointer for package: python2-jsonpatch-1.21-1.el7.noarch
---> Package python2-monotonic.noarch 0:1.5-1.el7 will be installed
---> Package python2-munch.noarch 0:2.2.0-2.el7 will be installed
---> Package python2-os-client-config.noarch 0:1.33.0-2.el7 will be installed
---> Package python2-os-service-types.noarch 0:1.7.0-2.el7 will be installed
---> Package python2-oslo-config.noarch 2:6.11.3-1.el7 will be installed
--> Processing Dependency: python2-rfc3986 >= 1.2.0 for package: 2:python2-oslo-config-6.11.3-1.el7.noarch
---> Package python2-oslo-log.noarch 0:3.44.3-1.el7 will be installed
--> Processing Dependency: python-oslo-log-lang = 3.44.3-1.el7 for package: python2-oslo-log-3.44.3-1.el7.noarch
--> Processing Dependency: python2-oslo-context >= 2.20.0 for package: python2-oslo-log-3.44.3-1.el7.noarch
---> Package python2-oslo-serialization.noarch 0:2.29.3-1.el7 will be installed
--> Processing Dependency: python2-msgpack >= 0.5.2 for package: python2-oslo-serialization-2.29.3-1.el7.noarch
---> Package python2-requestsexceptions.noarch 0:1.4.0-1.el7 will be installed
---> Package python2-simplejson.x86_64 0:3.16.0-5.el7 will be installed
---> Package python2-stevedore.noarch 0:1.31.0-2.el7 will be installed
---> Package python2-wrapt.x86_64 0:1.11.1-1.el7 will be installed
--> Running transaction check
---> Package python-oslo-log-lang.noarch 0:3.44.3-1.el7 will be installed
---> Package python2-contextlib2.noarch 0:0.5.5-8.el7 will be installed
---> Package python2-jsonpointer.noarch 0:1.10-4.el7 will be installed
---> Package python2-jsonschema.noarch 0:2.6.0-2.el7 will be installed
--> Processing Dependency: python-repoze-lru for package: python2-jsonschema-2.6.0-2.el7.noarch
---> Package python2-msgpack.x86_64 0:0.6.1-2.el7 will be installed
---> Package python2-oslo-context.noarch 0:2.23.1-1.el7 will be installed
---> Package python2-pyperclip.noarch 0:1.6.4-1.el7 will be installed
---> Package python2-rfc3986.noarch 0:1.3.0-1.el7 will be installed
---> Package python2-wcwidth.noarch 0:0.2.5-1.el7 will be installed
--> Processing Dependency: python2-backports-functools_lru_cache for package: python2-wcwidth-0.2.5-1.el7.noarch
--> Running transaction check
---> Package python-repoze-lru.noarch 0:0.4-3.el7 will be installed
---> Package python2-backports-functools_lru_cache.noarch 0:1.2.1-4.el7 will be installed
--> Finished Dependency ResolutionDependencies Resolved======================================================================Package Arch Version Repository Size
======================================================================
Installing:python2-openstackclientnoarch 4.0.2-1.el7 centos-openstack-train 1.1 M
Installing for dependencies:python-keyring noarch 5.7.1-1.el7 centos-openstack-train 116 kpython-openstackclient-langnoarch 4.0.2-1.el7 centos-openstack-train 53 kpython-oslo-i18n-langnoarch 3.24.0-2.el7 centos-openstack-train 9.6 kpython-oslo-log-langnoarch 3.44.3-1.el7 centos-openstack-train 8.9 kpython-oslo-utils-langnoarch 3.41.6-1.el7 centos-openstack-train 8.9 kpython-prettytable noarch 0.7.2-3.el7 base 37 kpython-repoze-lru noarch 0.4-3.el7 centos-openstack-train 12 kpython-unicodecsv noarch 0.14.1-4.el7 epel 26 kpython-warlock noarch 1.0.1-1.el7 centos-openstack-train 14 kpython2-appdirs noarch 1.4.4-1.el7 epel 18 kpython2-babel noarch 2.6.0-4.el7 centos-openstack-train 5.7 Mpython2-backports-functools_lru_cachenoarch 1.2.1-4.el7 epel 12 kpython2-cinderclientnoarch 5.0.2-1.el7 centos-openstack-train 234 kpython2-cliff noarch 2.16.0-2.el7 centos-openstack-train 89 kpython2-cmd2 noarch 0.8.8-5.el7 centos-openstack-train 105 kpython2-contextlib2 noarch 0.5.5-8.el7 centos-openstack-train 20 kpython2-debtcollectornoarch 1.22.0-2.el7 centos-openstack-train 28 kpython2-dogpile-cachenoarch 0.6.8-1.el7 centos-openstack-train 73 kpython2-funcsigs noarch 1.0.2-4.el7 epel 25 kpython2-glanceclientnoarch 1:2.17.1-1.el7centos-openstack-train 141 kpython2-iso8601 noarch 0.1.11-8.el7 epel 20 kpython2-jmespath noarch 0.9.4-2.el7 epel 41 kpython2-jsonpatch noarch 1.21-1.el7 centos-openstack-train 21 kpython2-jsonpointer noarch 1.10-4.el7 centos-openstack-train 14 kpython2-jsonschema noarch 2.6.0-2.el7 centos-openstack-train 76 kpython2-keystoneauth1noarch 3.17.4-1.el7 centos-openstack-train 416 kpython2-keystoneclientnoarch 1:3.21.0-2.el7centos-openstack-train 242 kpython2-monotonic noarch 1.5-1.el7 centos-openstack-train 14 kpython2-msgpack x86_64 0.6.1-2.el7 centos-openstack-train 87 kpython2-munch noarch 2.2.0-2.el7 centos-openstack-train 16 kpython2-neutronclientnoarch 6.14.1-1.el7 centos-openstack-train 301 kpython2-novaclient noarch 1:15.1.1-1.el7centos-openstack-train 221 kpython2-openstacksdknoarch 0.36.5-1.el7 centos-openstack-train 768 kpython2-os-client-confignoarch 1.33.0-2.el7 centos-openstack-train 49 kpython2-os-service-typesnoarch 1.7.0-2.el7 centos-openstack-train 31 kpython2-osc-lib noarch 1.14.1-2.el7 centos-openstack-train 72 kpython2-oslo-config noarch 2:6.11.3-1.el7centos-openstack-train 224 kpython2-oslo-contextnoarch 2.23.1-1.el7 centos-openstack-train 21 kpython2-oslo-i18n noarch 3.24.0-2.el7 centos-openstack-train 53 kpython2-oslo-log noarch 3.44.3-1.el7 centos-openstack-train 59 kpython2-oslo-serializationnoarch 2.29.3-1.el7 centos-openstack-train 29 kpython2-oslo-utils noarch 3.41.6-1.el7 centos-openstack-train 74 kpython2-pbr noarch 5.1.2-2.el7 centos-openstack-train 1.1 Mpython2-pyperclip noarch 1.6.4-1.el7 centos-openstack-train 17 kpython2-requestsexceptionsnoarch 1.4.0-1.el7 centos-openstack-train 11 kpython2-rfc3986 noarch 1.3.0-1.el7 epel 48 kpython2-simplejson x86_64 3.16.0-5.el7 centos-openstack-train 119 kpython2-stevedore noarch 1.31.0-2.el7 centos-openstack-train 56 kpython2-wcwidth noarch 0.2.5-1.el7 epel 38 kpython2-wrapt x86_64 1.11.1-1.el7 centos-openstack-train 48 kTransaction Summary
======================================================================
Install 1 Package (+50 Dependent packages)Total download size: 12 M
Installed size: 54 M
Downloading packages:
(1/51): python-openstackclient-lang-4.0.2-1.el7. | 53 kB 00:00
(2/51): python-keyring-5.7.1-1.el7.noarch.rpm | 116 kB 00:00
(3/51): python-oslo-i18n-lang-3.24.0-2.el7.noarc | 9.6 kB 00:00
(4/51): python-oslo-log-lang-3.44.3-1.el7.noarch | 8.9 kB 00:00
(5/51): python-oslo-utils-lang-3.41.6-1.el7.noar | 8.9 kB 00:00
(6/51): python-repoze-lru-0.4-3.el7.noarch.rpm | 12 kB 00:00
(7/51): python-warlock-1.0.1-1.el7.noarch.rpm | 14 kB 00:00
(8/51): python2-appdirs-1.4.4-1.el7.noarch.rpm | 18 kB 00:00
(9/51): python2-backports-functools_lru_cache-1. | 12 kB 00:00
(10/51): python-unicodecsv-0.14.1-4.el7.noarch.r | 26 kB 00:00
(11/51): python2-babel-2.6.0-4.el7.noarch.rpm | 5.7 MB 00:00
(12/51): python2-cinderclient-5.0.2-1.el7.noarch | 234 kB 00:00
warning: /var/cache/yum/x86_64/7/base/packages/python-prettytable-0.7.2-3.el7.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Public key for python-prettytable-0.7.2-3.el7.noarch.rpm is not installed
(13/51): python-prettytable-0.7.2-3.el7.noarch.r | 37 kB 00:00
(14/51): python2-cliff-2.16.0-2.el7.noarch.rpm | 89 kB 00:00
(15/51): python2-cmd2-0.8.8-5.el7.noarch.rpm | 105 kB 00:00
(16/51): python2-contextlib2-0.5.5-8.el7.noarch. | 20 kB 00:00
(17/51): python2-dogpile-cache-0.6.8-1.el7.noarc | 73 kB 00:00
(18/51): python2-glanceclient-2.17.1-1.el7.noarc | 141 kB 00:00
(19/51): python2-debtcollector-1.22.0-2.el7.noar | 28 kB 00:00
(20/51): python2-funcsigs-1.0.2-4.el7.noarch.rpm | 25 kB 00:00
(21/51): python2-jmespath-0.9.4-2.el7.noarch.rpm | 41 kB 00:00
(22/51): python2-iso8601-0.1.11-8.el7.noarch.rpm | 20 kB 00:00
(23/51): python2-jsonpatch-1.21-1.el7.noarch.rpm | 21 kB 00:00
(24/51): python2-jsonschema-2.6.0-2.el7.noarch.r | 76 kB 00:00
(25/51): python2-jsonpointer-1.10-4.el7.noarch.r | 14 kB 00:00
(26/51): python2-keystoneclient-3.21.0-2.el7.noa | 242 kB 00:00
(27/51): python2-keystoneauth1-3.17.4-1.el7.noar | 416 kB 00:00
(28/51): python2-monotonic-1.5-1.el7.noarch.rpm | 14 kB 00:00
(29/51): python2-munch-2.2.0-2.el7.noarch.rpm | 16 kB 00:00
(30/51): python2-neutronclient-6.14.1-1.el7.noar | 301 kB 00:00
(31/51): python2-msgpack-0.6.1-2.el7.x86_64.rpm | 87 kB 00:00
(32/51): python2-novaclient-15.1.1-1.el7.noarch. | 221 kB 00:00
(33/51): python2-openstacksdk-0.36.5-1.el7.noarc | 768 kB 00:00
(34/51): python2-openstackclient-4.0.2-1.el7.noa | 1.1 MB 00:00
(35/51): python2-os-client-config-1.33.0-2.el7.n | 49 kB 00:00
(36/51): python2-os-service-types-1.7.0-2.el7.no | 31 kB 00:00
(37/51): python2-osc-lib-1.14.1-2.el7.noarch.rpm | 72 kB 00:00
(38/51): python2-oslo-context-2.23.1-1.el7.noarc | 21 kB 00:00
(39/51): python2-oslo-config-6.11.3-1.el7.noarch | 224 kB 00:00
(40/51): python2-oslo-i18n-3.24.0-2.el7.noarch.r | 53 kB 00:00
(41/51): python2-oslo-log-3.44.3-1.el7.noarch.rp | 59 kB 00:00
(42/51): python2-oslo-serialization-2.29.3-1.el7 | 29 kB 00:00
(43/51): python2-oslo-utils-3.41.6-1.el7.noarch. | 74 kB 00:00
(44/51): python2-pyperclip-1.6.4-1.el7.noarch.rp | 17 kB 00:00
(45/51): python2-pbr-5.1.2-2.el7.noarch.rpm | 1.1 MB 00:00
(46/51): python2-requestsexceptions-1.4.0-1.el7. | 11 kB 00:00
(47/51): python2-simplejson-3.16.0-5.el7.x86_64. | 119 kB 00:00
(48/51): python2-stevedore-1.31.0-2.el7.noarch.r | 56 kB 00:00
(49/51): python2-wrapt-1.11.1-1.el7.x86_64.rpm | 48 kB 00:00
(50/51): python2-rfc3986-1.3.0-1.el7.noarch.rpm | 48 kB 00:00
(51/51): python2-wcwidth-0.2.5-1.el7.noarch.rpm | 38 kB 00:00
----------------------------------------------------------------------
Total 18 MB/s | 12 MB 00:00
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Importing GPG key 0xF4A80EB5:Userid : "CentOS-7 Key (CentOS 7 Official Signing Key) "Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5Package : centos-release-7-9.2009.1.el7.centos.x86_64 (@updates)From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Running transaction check
Running transaction test
Transaction test succeeded
Running transactionInstalling : python2-pbr-5.1.2-2.el7.noarch 1/51 Installing : python2-babel-2.6.0-4.el7.noarch 2/51 Installing : python2-iso8601-0.1.11-8.el7.noarch 3/51 Installing : python2-stevedore-1.31.0-2.el7.noarch 4/51 Installing : python2-simplejson-3.16.0-5.el7.x86_64 5/51 Installing : python-prettytable-0.7.2-3.el7.noarch 6/51 Installing : python2-os-service-types-1.7.0-2.el7.noarch 7/51 Installing : python2-keystoneauth1-3.17.4-1.el7.noarch 8/51 Installing : python2-wrapt-1.11.1-1.el7.x86_64 9/51 Installing : python2-funcsigs-1.0.2-4.el7.noarch 10/51 Installing : python2-debtcollector-1.22.0-2.el7.noarch 11/51 Installing : python2-monotonic-1.5-1.el7.noarch 12/51 Installing : python2-oslo-context-2.23.1-1.el7.noarch 13/51 Installing : python2-pyperclip-1.6.4-1.el7.noarch 14/51 Installing : python2-msgpack-0.6.1-2.el7.x86_64 15/51 Installing : python2-jsonpointer-1.10-4.el7.noarch 16/51 Installing : python2-jsonpatch-1.21-1.el7.noarch 17/51 Installing : python-repoze-lru-0.4-3.el7.noarch 18/51 Installing : python2-jsonschema-2.6.0-2.el7.noarch 19/51 Installing : python-warlock-1.0.1-1.el7.noarch 20/51 Installing : python-oslo-i18n-lang-3.24.0-2.el7.noarch 21/51 Installing : python2-oslo-i18n-3.24.0-2.el7.noarch 22/51 Installing : python-oslo-log-lang-3.44.3-1.el7.noarch 23/51 Installing : python2-requestsexceptions-1.4.0-1.el7.noarch 24/51 Installing : python-unicodecsv-0.14.1-4.el7.noarch 25/51 Installing : python-openstackclient-lang-4.0.2-1.el7.noarch 26/51 Installing : python2-jmespath-0.9.4-2.el7.noarch 27/51 Installing : python-keyring-5.7.1-1.el7.noarch 28/51 Installing : python2-appdirs-1.4.4-1.el7.noarch 29/51 Installing : python2-munch-2.2.0-2.el7.noarch 30/51 Installing : python2-backports-functools_lru_cache-1.2.1-4. 31/51 Installing : python2-wcwidth-0.2.5-1.el7.noarch 32/51 Installing : python2-contextlib2-0.5.5-8.el7.noarch 33/51 Installing : python2-cmd2-0.8.8-5.el7.noarch 34/51 Installing : python2-cliff-2.16.0-2.el7.noarch 35/51 Installing : python2-dogpile-cache-0.6.8-1.el7.noarch 36/51 Installing : python2-openstacksdk-0.36.5-1.el7.noarch 37/51 Installing : python2-os-client-config-1.33.0-2.el7.noarch 38/51 Installing : python-oslo-utils-lang-3.41.6-1.el7.noarch 39/51 Installing : python2-oslo-utils-3.41.6-1.el7.noarch 40/51 Installing : python2-oslo-serialization-2.29.3-1.el7.noarch 41/51 Installing : python2-osc-lib-1.14.1-2.el7.noarch 42/51 Installing : 1:python2-novaclient-15.1.1-1.el7.noarch 43/51 Installing : 1:python2-glanceclient-2.17.1-1.el7.noarch 44/51 Installing : python2-cinderclient-5.0.2-1.el7.noarch 45/51 Installing : python2-rfc3986-1.3.0-1.el7.noarch 46/51 Installing : 2:python2-oslo-config-6.11.3-1.el7.noarch 47/51 Installing : 1:python2-keystoneclient-3.21.0-2.el7.noarch 48/51 Installing : python2-oslo-log-3.44.3-1.el7.noarch 49/51 Installing : python2-neutronclient-6.14.1-1.el7.noarch 50/51 Installing : python2-openstackclient-4.0.2-1.el7.noarch 51/51 Verifying : python2-rfc3986-1.3.0-1.el7.noarch 1/51 Verifying : python2-oslo-log-3.44.3-1.el7.noarch 2/51 Verifying : python-oslo-utils-lang-3.41.6-1.el7.noarch 3/51 Verifying : python2-oslo-utils-3.41.6-1.el7.noarch 4/51 Verifying : python2-dogpile-cache-0.6.8-1.el7.noarch 5/51 Verifying : python2-monotonic-1.5-1.el7.noarch 6/51 Verifying : python2-funcsigs-1.0.2-4.el7.noarch 7/51 Verifying : python2-contextlib2-0.5.5-8.el7.noarch 8/51 Verifying : python2-backports-functools_lru_cache-1.2.1-4. 9/51 Verifying : python2-openstacksdk-0.36.5-1.el7.noarch 10/51 Verifying : python2-neutronclient-6.14.1-1.el7.noarch 11/51 Verifying : 2:python2-oslo-config-6.11.3-1.el7.noarch 12/51 Verifying : python2-osc-lib-1.14.1-2.el7.noarch 13/51 Verifying : python2-iso8601-0.1.11-8.el7.noarch 14/51 Verifying : python2-oslo-context-2.23.1-1.el7.noarch 15/51 Verifying : python2-munch-2.2.0-2.el7.noarch 16/51 Verifying : python2-babel-2.6.0-4.el7.noarch 17/51 Verifying : 1:python2-glanceclient-2.17.1-1.el7.noarch 18/51 Verifying : python2-keystoneauth1-3.17.4-1.el7.noarch 19/51 Verifying : python2-appdirs-1.4.4-1.el7.noarch 20/51 Verifying : python2-wcwidth-0.2.5-1.el7.noarch 21/51 Verifying : 1:python2-novaclient-15.1.1-1.el7.noarch 22/51 Verifying : python2-debtcollector-1.22.0-2.el7.noarch 23/51 Verifying : python2-cliff-2.16.0-2.el7.noarch 24/51 Verifying : python-keyring-5.7.1-1.el7.noarch 25/51 Verifying : python2-openstackclient-4.0.2-1.el7.noarch 26/51 Verifying : python2-jmespath-0.9.4-2.el7.noarch 27/51 Verifying : python-openstackclient-lang-4.0.2-1.el7.noarch 28/51 Verifying : python-unicodecsv-0.14.1-4.el7.noarch 29/51 Verifying : python-prettytable-0.7.2-3.el7.noarch 30/51 Verifying : python2-oslo-i18n-3.24.0-2.el7.noarch 31/51 Verifying : python2-requestsexceptions-1.4.0-1.el7.noarch 32/51 Verifying : python-oslo-log-lang-3.44.3-1.el7.noarch 33/51 Verifying : python2-jsonschema-2.6.0-2.el7.noarch 34/51 Verifying : python-warlock-1.0.1-1.el7.noarch 35/51 Verifying : python2-wrapt-1.11.1-1.el7.x86_64 36/51 Verifying : python2-cmd2-0.8.8-5.el7.noarch 37/51 Verifying : python2-jsonpatch-1.21-1.el7.noarch 38/51 Verifying : python2-simplejson-3.16.0-5.el7.x86_64 39/51 Verifying : python-oslo-i18n-lang-3.24.0-2.el7.noarch 40/51 Verifying : python2-cinderclient-5.0.2-1.el7.noarch 41/51 Verifying : python2-os-client-config-1.33.0-2.el7.noarch 42/51 Verifying : python2-stevedore-1.31.0-2.el7.noarch 43/51 Verifying : python-repoze-lru-0.4-3.el7.noarch 44/51 Verifying : python2-jsonpointer-1.10-4.el7.noarch 45/51 Verifying : python2-msgpack-0.6.1-2.el7.x86_64 46/51 Verifying : python2-pyperclip-1.6.4-1.el7.noarch 47/51 Verifying : 1:python2-keystoneclient-3.21.0-2.el7.noarch 48/51 Verifying : python2-oslo-serialization-2.29.3-1.el7.noarch 49/51 Verifying : python2-pbr-5.1.2-2.el7.noarch 50/51 Verifying : python2-os-service-types-1.7.0-2.el7.noarch 51/51 Installed:python2-openstackclient.noarch 0:4.0.2-1.el7 Dependency Installed:python-keyring.noarch 0:5.7.1-1.el7 python-openstackclient-lang.noarch 0:4.0.2-1.el7 python-oslo-i18n-lang.noarch 0:3.24.0-2.el7 python-oslo-log-lang.noarch 0:3.44.3-1.el7 python-oslo-utils-lang.noarch 0:3.41.6-1.el7 python-prettytable.noarch 0:0.7.2-3.el7 python-repoze-lru.noarch 0:0.4-3.el7 python-unicodecsv.noarch 0:0.14.1-4.el7 python-warlock.noarch 0:1.0.1-1.el7 python2-appdirs.noarch 0:1.4.4-1.el7 python2-babel.noarch 0:2.6.0-4.el7 python2-backports-functools_lru_cache.noarch 0:1.2.1-4.el7 python2-cinderclient.noarch 0:5.0.2-1.el7 python2-cliff.noarch 0:2.16.0-2.el7 python2-cmd2.noarch 0:0.8.8-5.el7 python2-contextlib2.noarch 0:0.5.5-8.el7 python2-debtcollector.noarch 0:1.22.0-2.el7 python2-dogpile-cache.noarch 0:0.6.8-1.el7 python2-funcsigs.noarch 0:1.0.2-4.el7 python2-glanceclient.noarch 1:2.17.1-1.el7 python2-iso8601.noarch 0:0.1.11-8.el7 python2-jmespath.noarch 0:0.9.4-2.el7 python2-jsonpatch.noarch 0:1.21-1.el7 python2-jsonpointer.noarch 0:1.10-4.el7 python2-jsonschema.noarch 0:2.6.0-2.el7 python2-keystoneauth1.noarch 0:3.17.4-1.el7 python2-keystoneclient.noarch 1:3.21.0-2.el7 python2-monotonic.noarch 0:1.5-1.el7 python2-msgpack.x86_64 0:0.6.1-2.el7 python2-munch.noarch 0:2.2.0-2.el7 python2-neutronclient.noarch 0:6.14.1-1.el7 python2-novaclient.noarch 1:15.1.1-1.el7 python2-openstacksdk.noarch 0:0.36.5-1.el7 python2-os-client-config.noarch 0:1.33.0-2.el7 python2-os-service-types.noarch 0:1.7.0-2.el7 python2-osc-lib.noarch 0:1.14.1-2.el7 python2-oslo-config.noarch 2:6.11.3-1.el7 python2-oslo-context.noarch 0:2.23.1-1.el7 python2-oslo-i18n.noarch 0:3.24.0-2.el7 python2-oslo-log.noarch 0:3.44.3-1.el7 python2-oslo-serialization.noarch 0:2.29.3-1.el7 python2-oslo-utils.noarch 0:3.41.6-1.el7 python2-pbr.noarch 0:5.1.2-2.el7 python2-pyperclip.noarch 0:1.6.4-1.el7 python2-requestsexceptions.noarch 0:1.4.0-1.el7 python2-rfc3986.noarch 0:1.3.0-1.el7 python2-simplejson.x86_64 0:3.16.0-5.el7 python2-stevedore.noarch 0:1.31.0-2.el7 python2-wcwidth.noarch 0:0.2.5-1.el7 python2-wrapt.x86_64 0:1.11.1-1.el7 Complete!
[root@template yum.repos.d]#
下一篇：使用send给生成器注入数据
相关内容
热门资讯
你的晚安是我的早安是什么歌曲
你的晚安是我的早安是什么歌曲苏天伦《你的早安是我的晚安》“你的晚安是我的早安”是单小源的歌曲《东京遇...
积极进取的小故事
积极进取的小故事现代的普通人，不要名人的。不能与别人重复，尽快回答 啄木鸟的故事 啄...
熊出没之探险日记3什么时候播出...
熊出没之探险日记3什么时候播出？熊出没之探险日记3，春节前播放。熊出没只是探险日记三2020年5月4...
谁知道所有有关“七”的歌？拜托...
谁知道所有有关“七”的歌？拜托了各位 谢谢就是歌曲名里有“七”这个字的！谢谢七月七迅谈日晴 看我七十...
求一本小说 女主穿越了三次 每...
求一本小说 女主穿越了三次 每次都在福临身边 后来怀孕了孩子被打掉了那个 女主叫什么雯？那个女主就是...
如果记忆不说话，流年也会开出花...
如果记忆不说话，流年也会开出花的基本信息书 名：《如果记忆不弯饥好说话，流年也会开出花》埋铅 作 者...
你好,旧时光漫画版在哪里可以看...
你好,旧时光漫画版在哪里可以看？暂时在绘心上连载
一首英文歌，男的组合唱的，MV...
一首英文歌，男的组合唱的，MV是一个婚礼的过程。求歌名。是不是darin的can'tstoplove...
为什么很多人喜欢用胶片相机？
为什么很多人喜欢用胶片相机？有一种情怀叫做“怀旧“吧，现在数码相机越来越普遍了，已经到了”全民摄影“...
女主先爱上男主，男主却不喜欢女...
女主先爱上男主，男主却不喜欢女主或者是另有所爱，最后女主男主还是在一起的穿越小说。有木有再生缘：我的...
爱情失恋伤感句子
爱情失恋伤感句子越是美好的从前，越幸福的曾经，现在只能带来锥心的疼痛，痛到撕心裂肺，肝肠寸断，终于痛...
24岁穿这个会不会显老
24岁穿这个会不会显老有点显老，这个颜色款式，颜色有点暗，没有活力，属于那种气质佳，长得高雅的女人，...
哈尔的移动城堡英语版
哈尔的移动城堡英语版可以发给我吗度盘~请查收~
秦时明月之万里长城什么时候播
秦时明月之万里长城什么时候播据说是今年暑假开播别急，官网什么的信他你就输了，12年之前底应该会出，杭...
孩子会得抽动症吗？
孩子会得抽动症吗？我天生的气性比较大，有时跟别人斗嘴时候就会手脚哆嗦，麻木，我问一下这是不是抽动症就...
亨德尔一生为音乐献出了怎样的贡...
亨德尔一生为音乐献出了怎样的贡献？亨德尔一生写了歌剧41部，清唱剧21部，以及大量的管乐器与弦乐器的...
礼仪起源和发展的经典故事？
礼仪起源和发展的经典故事？一、礼仪的起源；1、天神生礼仪；2、礼为天地人的统一体；3、礼产生于人的自...
描写桂林山水的句子有哪些?
描写桂林山水的句子有哪些?天下风光数桂林有杨万里的“梅花五岭八桂林，青罗带绕碧玉簪”；有邹应龙的“无...
避免与强敌正面对决的成语
避免与强敌正面对决的成语避免与强敌正面对决的成语避实就虚 【近义】避重就轻、避难就易、声东击西【反义...
多愁善感类的成语
多愁善感类的成语心细如发【解释】：极言小心谨慎，考虑周密。亦作“心细于发”。【出自】：吴梅《题天香石...